What should I do if the shower head is blocked? Many people may think that disassembly and cleaning are very troublesome. In fact, the operation is very simple. It does not require you to completely disassemble the shower head. The most important thing is to clean the shower head. After a long time of use, the shower head will be blocked, which is very natural. This does not mean that the shower head is broken. There is no need to buy a new one, just disassemble the shower head and clean it.

The main ingredient for cleaning shower heads is white vinegar, which is also a household seasoning. After taking the shower head off, we put it in a small basin filled with white vinegar, soak it for about two hours, after soaking, brush it with a toothbrush, then rinse it off with clean water; if there is hard water sediment, use lemon slices scrub. When cleaning the shower head, pay special attention not to use strong acid (preferably white vinegar), so as not to cause corrosion to the shower head surface. In order to ensure that the nozzles are not blocked, it is best to clean the shower nozzles every six months or less, so that you no longer have to worry about suddenly blocking the nozzles and affecting the mood of the shower. In order to ensure the service life of the shower head, it is best not to install it directly under the Yuba.

Cleaning tips for clogged shower heads

The shower in the shower will have scale after a long time, especially the shower head, as well as the shower rod of the shower and the water outlet of the shower faucet. These places are most prone to scale, so how to remove scale?

Technique 1: Use a toothbrush, toothpaste, and white vinegar

Tool: toothbrush

Cleaning agent: toothpaste, white vinegar

Method 1: First prepare tools toothbrush, toothpaste and white vinegar

Method 2: To clean the shower column, white vinegar and toothpaste can be used in sequence, and toothpaste has the best cleaning effect.

Method 3: White vinegar is mainly used to clean the shower head, first remove the shower head, and then soak it in white vinegar

Method 4: Then brush the nozzle with a toothbrush. For the faucet outlet of the shower, the easiest way is to brush with toothpaste and a toothbrush.

Method 5: After cleaning with toothpaste and white vinegar, rinse with clean water.

For the shower cleaning method, be sure to master some tips. The scale produced by the shower is mainly calcium carbonate, which needs to be decomposed with vinegar, so white vinegar is used for cleaning and soaking. For the shower head, it needs to be soaked in white vinegar to clean the toothbrush, and the shower column, lift rod, stainless steel hose, hot and cold water control valve, etc., are best cleaned with toothpaste, only the top spray and the shower head need to be cleaned. Soak and clean with white vinegar.

Skill 2: Using acupuncture

If some of the small holes in your shower head are blocked, put water first and see which holes are blocked at the bottom, then you have to open the shower head of the shower and see this like a shower head There are a lot of small holes on the shower head. This is where the water comes out. Then we will prepare a needle first, and use the needle to pierce the impurities in the hole until there is no water in the hole. impurities. This method is the most direct, but be careful to puncture the shower hole.

Tip 3: Use lubricant

If the metal of the shower is rusted and the blockage is severe, use a rust-removing and anti-rust lubricant. This rust-removing lubricant can have good affinity and permeability with metal, the rust layer and metal layer can be separated, so that the rusted part is in contact with the metal surface, and leave a protective film, so that the shower will never rust, if You can use this method if the shower head in your home is not stainless steel.